The Process of Repiping Homes and Commercial Buildings

Repiping refers to the total replacement of plumbing systems in a home or other building. There are many reasons for repiping. An aging system is ripe for problems. Old pipes may contaminate the water supply or begin to leak. Ineffective materials are another reason for repiping. For instance, polybutylene pipes have been proven as ineffective and can fail without warning. They are no longer in use, but many homes and buildings still have them. Many question the safety of PVC pipes as well. Some brass fittings fail when they are dezincified. They also pose a danger to water supplies and property. An inspection and repiping can prevent these problems from occurring.

sheetrock prices

The first step in the repiping of a home or commercial building is an in depth inspection. This will reveal the extent of the job to be done. A simple pipe repair may be all that is needed. On the other hand, out dated materials like lead pipes and cast iron pipes must be removed and may involve more invasive pipe replacement. A complete repipe of all the plumbing in a home repair will include all domestic and potable water piping and waste piping. New hot and cold distribution or main pipes and branch pipes is also included. A quote is issued after the inspection. It includes the prices for all materials of replacement and labor. It does not include new fixtures unless you specifically request new ones be installed as part of the repipe.

SHEETROCK PRICES

Preparing for the repipe is the next step in the process. A down payment is often required before work begins. The system is planned out and materials are purchased. The client receives notification of how to protect their furnishings and belongings during the construction. The ceiling, floors, and walls are cut open to expose the old pipes. The water is turned off and the pipes are removed. Expect to be without water for 1-3 days.

Pipe is replaced by sections. As each section is finished it may need to be inspected by a county building inspector, this may make the process take a bit longer. When the repipe is completed, it is tested to ensure that it is functioning properly and is safe. Then the walls are repaired and finished. A separate drywall contractor may be brought in for this stage. When everything is completed, the plumber will give you a tour of your new plumbing. The rest of the money is due at this point and another home is ready for safe and effective water distribution.

The Process of Repiping Homes and Commercial Buildings

Certain types of pipes, such as lead or polybutylene, can be both harmful to your health and your wallet. If you have old pipes in your home or apartment, call SageWater, the pipe replacement experts, before it is too late.

SHEETROCK PRICES

Drywall Mudding and Taping - A Simple Process For Do-It-Yourself Homeowners

Drywall installation is one of the most common home improvement projects many homeowners find themselves faced with.  Whether you're replacing drywall in your home or adding a new wall as part of a bigger home improvement project, you may find yourself in a situation where you need to replace drywall in your home.  This article covers a few tips for making sure the finish on your drywall repair is done correctly so it will blend in with the rest of your home.

Gather the Right Tools and Supplies

SHEETROCK PRICES

There are a few tools and supplies you'll need to take on your drywall project.  First, you want to have enough joint compound for the job...roughly 1 gallon for every 100 square feed of area.  Of course, you'll also need a mud pan or similar container to hold the joint compound as you apply it.  In addition, you'll need a couple of taping knives or putty knives.  I recommend having a narrow one and one that's a bit wider for feathering out the seam.  You'll also need drywall tape to run along the seam.  Finally, you'll need sandpaper or something similar to sand down the joint compound between coats after it dries.

Applying the First Coat of Mud

The first thing you want to do is apply the drywall tape along the seam between the two pieces of drywall or sheetrock.  Try to do this so the seam runs along the center of the tap.  Once the tape is in place, you can start applying joint compound using one of the putty knives.  Liberally apply the joint compound as you run along the length of the seam and be sure the joint compound gets pushed into the seam to fill the gap.  Also, be sure you cover all of the tape with joint compound.  You may want to run across the length of the seam several times with joint compound, feathering out the mud as you continue to do so.  You can take care of the corners the same way, by taping and applying joint compound to the seam that forms the corner between the two pieces of drywall.  Last, you'll want to also apply joint compound to any nails holding up the pieces of drywall.  Simply use your putty knife for this while applying a liberal amount, then smoothing it out with the edge of the knife.  Then let the joint compound dry.

Applying the Second and Third Coats

You'll want to apply about 3 coats of joint compound.  After the first coat dries, be sure to sand down the joint compound on the seams and the nails before continuing.  This will ensure that the surface is smooth as you apply the next coat.  Then apply a second coat of joint compound to the seams in the same manner as the first coat, but spreading the joint compound out wider as you run along the seam.  Do the same for the nails and let this coat dry.  As you probably guessed, applying the third coat is the exact same process.

Getting Ready to Paint

Once you've applied the third coat of joint compound and let it dry, be sure to sand around the edges of the seams and nails one last time to ensure the surface is as smooth as possible.  You'll also want to wipe down the wall with a dry rag to get rid of any dust that is on the surface.

Now you're ready to prime and paint your walls.

Drywall Mudding and Taping - A Simple Process For Do-It-Yourself Homeowners

If you're a Maryland resident and want to learn more about how you can invest in a premium home remodeling service at an affordable price, we invite you to visit http://www.GlennConst.com. Glenn Construction is a full service Maryland home improvement contractor offering a wide range of home remodeling services including Maryland drywall repair and installation [http://www.glennconst.com/drywall.asp]. Visit us today to find out more.

Reprint Rights: Publishers and Webmasters, feel free to reprint this article for your sites as long as you leave all links active, leave all article content as-is, provide author credit and follow the EzineArticles Terms of Service for Publishers.

SHEETROCK PRICES