Drywall panels are used to cover inner walls and ceilings of home. Drywall panel consists of a sheet of gypsum in between two heavy paper facings. If drywall installation is done appropriately it adds to the beauty of the house and is useful for insulation.
A poorly installed drywall can be identified by inspecting the corners of the drywall. If you observe carefully you could find lift marks or holes in the surrounding area. This happens because finishing the corners is a tough job. You can always take additional care to help make finishing better.
SHEETROCK
Never apply too much or too little compound under the tape because it may cause problems later. Using longer sheets of drywall is a good idea as it reduces the number of joints and takes much lesser time to install. Installing drywall horizontally helps make the wall stronger. Putting the tape when the joint compound is wet is good as when you press the tape lightly over the mud, the excess mud flows out. Wet compound can damage the wall so make sure that the compound dries completely. You can always hide the hole on drywall so there is nothing to worry about it, if you see one. You can do this by coating the surface of drywall with a layer of wet joint compound. Scrape out the mud from the tape. As the mud dries, you can observe that the hole will disappear.
Drywall installation requires a blend of good hand-eye coordination and proper tools. Also the use of joint compound is important and so it is very essential to have joint compound of the right consistency to get desired finishing of the joints.
Tips for Drywall Installation
Powers Drywall & Insulation Inc. is a leading provider of Albany drywall & insulation installation services. We specialize in Albany sheetrock & installation with exceptional quality customer services. Visit http://www.powersdrywallandinsulation.com/
SHEETROCK
0 comments:
Post a Comment